Section has not been found.
High pressure vortex flowmeter EMIS-VIHR 200 PPD
- Product description
- Technical parameters
- Certificates
- Presentations
- Metering Skids
Download data sheet configuration
PPD* flowmeters for maintaining reservoir pressure
The high pressure flow-meter EMIS-VIHR 200 PPD measures:
- 1) fresh water (lake, river),
- 2) tank water (from oil treatment unit),
- 3) reservoir and Cenomanian water,
- 4) oil-in-water mixture,
- 5) chemical and other liquid products unaggressive to the stoinless of 304, 316, 316l, 321H, 316ti grade
Today many requirements are issued to the flowmeters and oil meters, such as the high accuracy, reliability, measurement data independence from substance density variation, operation speed and wide measurement range.
The vortex flowmeters for maintaining layer pressure (PPD) are installed in the water distribution unit assemblies. Such devices are used to measure water volume injected in the water injection wells of layer pressure maintenance systems in the oil fields. This device is designed to gauge pressure up to 25MPa compared to the traditional vortex flowmeters. This version of the vortex flowmeter was designed for reliable medium measurement of mediums under high pressure and with mechanical impurities. Also it can be used as a part of automated control systems and for the local automation diagrams.
To buy vortex flowmeter EMIS-VIHR PPD or request a price please fill out the questionnaire. The Sales Manager will automatically receive the interactive questionnaire. The expert will calculate the cost of the desired device modification corresponding to your procedure specification.
Oil and petroleum products metering with the help of EMIS-VIHR 200 PPD
The advantage of the vortex flowmeters EMIS-VIHR 200 PPD is the non-clogging design. The flowmeter is essential in production process, because Its wetted part can clean itself. This type of vortex flowmeter is universally applicable in any automation architecture because digital Modbus and analogue current output signals, as well as software for fast professional setup are easy to operate and friendly.
The advantages
- Metrological characteristics of the devices will not be changed within 12 years without maintenance.
- The verification interval is 4 years.
- The verification is performed by the simulation technique.
- The competent advice of the experts and service persons, installation services and start-up and commissioning.
- The device design can be changed under the individual requirements as EMIS company designs the instruments under special industrial needs.
You might be interested:
Vortex flowmeter EMIS-VIHR 200 Tachometric flowmeter EMIS-PLAST 220 Magnetic flowmeter EMIS-MAG 270| Parameter | Description |
| Medium | liquids with mechanical inclusions of up to 1 g/l and volumetric gas inclusions up to 15% |
| Flow range | See table Flow Range |
| Accuracy |
up to ±0.5% |
|
Dynamic viscosity of the medium |
up to 7 mPa*s |
|
Gauge pressure |
up to 30 MPa |
|
Pipeline Dn |
50, 80, 100, 150 mm |
| Medium temperature | 0°С .. +100°С |
| Output signals |
|
| Explosion protection |
|
| Ambient temperature |
-60°С...+70°С |
| Ingress protection | IP66/68 |
|
Calibration interval |
4 years |
-
Certificate of Conformity for Electromagnetic compatibility EMC Directive 2014/30/EU
-
EV-200-PED_module_B
-
EV-200-PED_module_C2
-
ATEX production quality assurance notification
-
Explosion protection certificate "Equipment and protective systems intended for use in potentially explosive atmospheres" ATEX Directive 2014/34/EU
-
The Customs Union Certificate of Conformity ТR CU 012 “On the safety of equipment applied in hazardous area”. EMIS-VIHR
-
Approval for food application. EMIS-VIHR 200
-
Declaration of Conformity for «Electromagnetic compatibility»
-
Certificate of Seismic Resistance
-
Certificate of Conformity TR CU 032 “On safety of equipment operating under excessive pressure”
-
Declaration of Conformity TR CU 032 “On safety of equipment operating under excessive pressure”
-
Certificate of Conformity GOST R 53679-2009, GOST R 53678-2009
-
TR CU 010/2011 "On Safety of Machinery and Equipment"
-
Certificate of vibration resistance. EMIS-VIHR 200
-
Certificate of Conformity ТR CU 012/2011. EMIS-VIHR 200
The layer water metering skid with solar batteries based on EMIS-VIHR 200 PPD installed at TPP «Volgogradneftegas».
Metering skid contains:
- Vortex flowmeter EMIS-VIHR 200 PPD.
- Mounting kit Vortex flowmeter EMIS-VIHR 200 PPD.
- Electric cabinet RizurBox-M-W3.
- Autonomous power supply set (A solar panel + storage battery).
- Pressure transmitter METRAN-150.
- Meter run and Flanged disassembling joint EMIS-VEKTA
| Parameter | Value |
| Measured medium | reservoir water |
| Dn, mm | 50...80 |
| Operating pressure range, MPa | от 4 to 7 |
| Mass water flow rate accuracy , % | ±1 |
| Medium temperature, °С | 0...+25 |
| Ambient temperature, °С | -28...+45 |
| Output signals | frequency; Modbus RTU; , analog 4-20 mA. |
| Explosion protection | Exd |
| Ingress protection | IP 67 |
Calculating flow rate immediate and sumnud, as well
