Section has not been found.
Metal rotameter EMIS-META 215
Various materials performance.
- Product description
- Documentation and software
- Technical parameters
- Certificates
- Advantages
- Сomplete set
- Presentations
- Executions
Download data sheet configuration
EMIS-META 215 is a metal rotameter with accuracy up to 1.5%.Flow tube and components are made of stainless steel, so the flowmeter can be applied to measure gases, liquids and steam.
Produced by EMIS flowmeters can measure the flow rate even of corrosive liquids. The especial hydrogen sulfide performance has optional Polytetrafluoroethylene lining (PTFE) of the float and measuring cavity and spreads the field of application.
Features & Benefits
- High accuracy.
- Easy installation.
- Convert the flow value to standard 4–20 mA analogue signal, or to digital signal, based on the HART protocol.
- The process safety is provided with the limits warning. The design simplicity ensures rotameter life evaluation and reliability.
To buy metal rotameter please fill in a questionnaire.
To order products, please, call: +7 (351) 729-99-13 or fill in a questionnaire with a description of the process. Our specialists provide you a detailed technical and commercial offer.
You might be interested:
Vortex flowmeter EMIS-VIHR 200| Parameter | Description |
| Medium |
|
| Flow range |
water: 2,5 - 100000 l/h gas: 0,07 - 3000 m3 /h |
| Accuracy | ±1%*; ±1,5%*, ±2,5%, ±4,0% |
| Pipeline Dn |
15 ..150 mm. |
| Process connection |
flanged, socket, clamp |
| Max pressure, MPa | Up to 10 |
| Medium temperature | -80°С … +250°С |
|
Output signals |
|
| Explosion protection** | 1 Ex ib IIB T4/T2 Gb, 1 Exd IIB T4/T2 Gb/Gbc |
| Ambient temperature*** | -60°С...+70°С |
| Ingress protection | IP65, IP67 |
|
Verification interval |
5 years |
|
*only for liquid medium **for version with output signal ***LCD displays indication above -30°С |
|
-
Type approval certificate. EMIS-META 215
-
Approval for food application. EMIS-VIHR 200
-
Declaration of Conformity for «Electromagnetic compatibility»
-
TR CU 010/2011 "On Safety of Machinery and Equipment"
-
Declaration of Conformity TR CU 032 “On safety of equipment operating under excessive pressure”
-
Certificate of Conformity TR CU 032 “On safety of equipment operating under excessive pressure”
-
SIL2 certificate
-
Certificate of vibration resistance. EMIS-META 215
-
Certificate of Application in the Oil and Gas Industry
-
The Customs Union Certificate of Conformity ТR CU 012 “On the safety of equipment applied in hazardous area”. EMIS-MERA 215
EMIS-META 215 retains the advantages of flowmeters:
- The universal principle of operation allows the use of device for flow measurement of any gases, liquids and steam.
- The design simplicity ensures rotameter long service life and reliability.
- Widely-spread application of the rotameters provides easy verification and calibration.
New features of metal rotameters:
- Metal body provides safe operation under high temperature and pressure conditions
- Special anti-corrosion configuration with PTFE lining expands the application range
- Built-in unified output signal 4-20 mА and two programmable emergency outputs
-
HART protocol
- Horizontal installation on the pipeline
|
|||||
|
|||
Warming type:
If it is necessary that the temperature of the medium does not change when passing through the rotameter, it is necessary to heat the measuring tube. For this purpose, it is optimal to use the heating jacket, which has fittings for supplying hot oil or steam.
The modification with the lining:
Rotameter EMIS-META 215 has anti-corrosion type for chemically corrosive mediums. Its wetted part has special PTFE lining.
Food type of metal rotameter EMIS-META 215:
The metal rotameter EMIS-META 215 can be used in the food industry as evidenced by the availability of a food application certificate.
Version with limit switches:
Rotameters are optionally equipped with one or two limit switches. The version with limit switch is made only if there is no output signal and LCD display.
