Coriolis Mass Flowmeters

Coriolis Mass Flowmeters EMIS-MASS 260

Designed to measure mass flow rate, mass, temperature, density and calculate volume flow rates, volumes of liquids and gases in the flow.

Used in systems of automatic monitoring, regulation and control of processes, in mixing and dosing systems, as par t of gaging gas separators, liquid and gas metering units (LACT units, automated systems for measurement of quantity and quality parameters of crude oil, gas amount measuring systems, etc.) in ground, including mobile, filling and pumping facilities of liquefied natural gas and in other processes in any industry.

They can be used for metering homogeneous and heterogeneous two-component media with calculation of the content of each component.

Specific features and advantages

• Additional Modbus register card compatible with the software of flow meters produced by foreign manufacturers.
• Dosing function with discrete output signal.
• Adjustable pulse weight and duration.
• Adjustable damping time of measured flow and density rea din gs, minimum flow shutdown setpoints, visual display of signal spectrum and digital signal filtering.
• Possibility to measure the flow rate of two-component liquid media with certified algorithms for calculating the content of each medium.
• Capability to calculate the mass of highly viscous liquids, non-Newtonian liquids, liquids with gas inclusions (up to 3% gas). Calculation of the volume gas flow rate reduced to standard conditions.
• Bank of safety switches to protect metrological parameters of the instrument from unauthorized changes.
• Access to the menu via built-in display and optical buttons to configure and control the flow meter.
• Confirmed absence of additional error in the current output signal and in reverse flow measurement.
• Possibility of connecting an external pressure transmitter and automatic pressure correction of measurements.
• Availability of the sanitary and epidemiological inspection report; certificates of resistance to hydrogen sulfide, resistance to vibrations and seismic resistance.
• Approved simulated verification without removing the flow meter from the pipeline.
• Verification interval is 5 years.
• Service and diagnostic proprietary software EMIS-Integrator.
• Connections according to GOST, EN and ANSI standards including DIN 11851.
• Possibility to manufacture instruments with mounting dimensions of imported analogs.
• Availability of compact version of the primary transducer (flow part) with reduced mass and dimensional parameters.